Artificial lawn installation is a simple process that can be done conveniently with some quick tips. If you opt for a professional artificial green grass turf installation, it provides better, long-lasting results.

In the present day, more and more people are turning to artificial lawn installation. From a low maintenance solution to a lovely year-round beautiful lawn, you enjoy the best benefits of installing artificial green grass turf. It is always good to buy your synthetic turf or artificial lawn from a reputable source that ensures quality and durability.

Do you want some quick tips for your artificial green grass turf installation on natural turf? Here is a helpful guide.

  1. Measure the Area:

It is necessary to measure your area to make a proper installation. Measure the length and width of the area that you need to cover with artificial grass. Measuring the installation area makes things smoother from the start.

  1. Check for Any Underground Hazards:

Make sure the installation area is free from any underground hazards, like electric wires or water pipes.

  1. Collect Necessary Tools and Equipment:

Before you start the artificial green grass installation make sure you have all the necessary tools and equipment. To install your artificial turf, you may need a geotextile weed killer, a Stanley knife, a turf cutter, and other accessories, such as glue and adhesive tape.

  1. Remove the Existing Surface: 

You can use a turf cutter to remove the existing surface. Never build your base for artificial green grass turf installation on topsoil. It is good to remove the top layer of the installation area by three to four inches.

  1. Lay the Base:

Use a shovel or wheelbarrow to scatter the base material, like stone, gravel, decomposed granite, or crushed rock as a base. You need around 3-4 inches of the base material to improve drainage and avoid slumping. The best sub-base for installing artificial green grass turf is one that can absorb surface water fast. Lay sharp sand 10-15mm thick on the top of your sub-base using a shovel to make it firm.

  1. Compact the Ground: 

Compact the ground by using a roller or vibrating plate or roller. You need to reduce the base by around 90% of its original depth. It should feel like concrete but retain the ability to drain surface water. Make sure to level the entire place that eliminates the presence of any high and low spots.

  1. Roll Out the Synthetic Turf: 

Roll out your synthetic grass turf over the installation area. Carefully hold the edges and shake lightly to let the air get under it, over the compacted stones. Remember not to drag the artificial grass turf over the base, as it might ruin the smooth surface. Laying the grass with the pile leaning towards your house or the main area looks natural.

  1. Let the turf Settle: 

It is advisable now to let your artificial green grass turf settle well. Leave the area for a minimum of three hours or overnight. It helps in stopping the artificial green grass turf from wrinkling or creasing.

  1. Cut Trim and Nail the Turf:

 After the settling process is complete, you need to cut and trim the artificial grass. Use a sharp Stanley knife to cut-down the artificial lawn around the edges. To perfectly fit the artificial turf, pin it down using the landscaping pins. You can also use flat-headed galvanized nails.

  1. Final Grooming:

Brush against the pile to bring the fibers of the artificial grass turf upright. Add the infill when your turf is completely dry. Brush the turf until the infill perfectly settles below the grass.

Conclusion:

If you want to enjoy a hassle-free and convenient artificial lawn installation, then trust the professionals. Hiring a reliable artificial green grass turf installation service saves you time and money.

About the Author:

This article is written by American Greens – a reliable artificial lawn installation service provider. They also provide installation services for artificial putting greens, synthetic playground surfaces, and more.